Disposable Endoscopic Cytology Brush High Positive Detection Rate 2.8mm Channel Brush Tissue Asepticity

• Type: Forceps
• Material: Plastic
• Ethylene Oxide Sterilization: Without Ethylene Oxide Sterilization
• Quality Guarantee Period: Three Years
• Group: Adult
• Logo Printing: With Logo Printing
• Model NO.: BC-L4-24-1200
• Certificate: CE, ISO
• Diameter: 2.3mm
• Length: 1200-2300
• Channel: 2.8mm
• Usage Times: 1
• Character: Linear Brush Head
• Model: Five Types
• Transport Package: Suitable for Long Time Shipping
• Specification: 1200-
• Trademark: RT
• Origin: Jiangsu, China
• HS Code: 9018903090
• Production Capacity: 50000PCS/Week

Product Description

Disposable endoscopic cytology brush
 

Intended Use:

Use immediately after unsealing.
Under the monitoring of the endoscope, feed the cell brush through the clamp hole of the endoscope, and move the brush head.
Move to the lesion or suspicious lesion, rub repeatedly around the lesion, and then return the brush head to the outer tube. Then withdraw the cell brush from the endoscope, and place the brush on the brush head on the glass slide to make the cell brush slide, thus
Case analysis was performed.
 

Product Description

Features:

1. Integrated brush head design, no possibility of bristles falling off;
2. The brush hair has a large unfolding angle and sufficient sampling to improve the positive detection rate;
3. The spherical head end is smooth and firm, and the bristles are moderate soft and hard, which can better reduce the irritation and damage to the cavity wall;
4. Double casing design, with good bending resistance and push performance;
5. Straight brush head is easier to enter the deep part of respiratory tract and digestive trac
6. -Adequate opening width of the jaw, to grasp large volume foreign tissues.
    

   Safety and Compliance

   The disposable cell brush is composed of a brush head, an outer tube, a stay cable, a slip ring, a booster tube, and a bracelet.
   
   
    

   Material

Component	Material	Standard
Clip	X7CrNi17-7	EN10088-1-2005
Sleeve	SUS316F	EN10088-1-2005
Metal Cap	X10CrNi18-9	EN10088-1-2005
Spring Sheath	X5CrNi18-10	EN10088-1-2005
Pulling Wire Components	X5CrNi18-10	EN10088-1-2005
Coating Layer	PE	ISO1872-1-1993
Protective Tube	X5CrNi18-10	EN10088-1-2005
Slider	ABS+TPE	ISO2580-1-2002 ASTM D5927-2009
Core Rod	ABS+TPE	ISO2580-1-2002 ASTM D5927-2009

 

Specification

Technical Specification and parameters:

Model	Diameter(mm)	Length(mm)	Channel(mm)	Linear type
BC-L4-24-1200	2.4	1200	2.8	Y
BC-L4-24-1600	2.4	1600	2.8	Y
BC-L4-24-1800	2.4	1800	2.8	Y
BC-L4-24-2300	2.4	2300	2.8	Y

 

Detailed Photos

 

 

About Shipping:
Normal questions: